China Heat Exchanger Manufacturers
A curated reference of selected domestic Chinese heat-exchanger manufacturers — from plate and shell-and-tube specialists to air-cooled and air-to-air leaders. Each entry opens an EN159 introduction page covering the company, its main products and manufacturing location.
This is an independently compiled directory prepared by EN159 for reference. Profiles are introductory only and do not constitute affiliation or endorsement. Profiles link to internal EN159 pages and contain no external manufacturer websites or contact details.
Plate Heat Exchangers
Manufacturers whose core product is the detachable, semi-welded or welded plate heat exchanger — the workhorse of HVAC, district heating, food, pharma and process cooling.
Selection tip: Choose detachable plate units for duties needing frequent cleaning (HVAC, district heating, food & pharma); semi-welded for ammonia/refrigerant loops; fully-welded or wide-channel for aggressive fluids and high temperature/pressure. Match plate material (304/316L, titanium for seawater) and gasket to the fluid, and confirm the Chinese A-series pressure class (A1–A6) suits your design pressure.
Zhejiang Yinlun Machinery Co., Ltd.
浙江银轮机械股份有限公司 Taizhou, ZhejiangListed on the Shenzhen Stock Exchange (002126) and founded in 1958, Yinlun is one of the largest thermal-management suppliers in China, with product platforms spanning commercial-vehicle, passenger and new-energy-vehicle thermal management, engine after-treatment, and industrial and civil heat exchange.
View profile →Shandong Beichen Mechatronics Co., Ltd.
山东北辰机电设备股份有限公司 (SDBC) Zibo, ShandongFounded in 1976 and listed on the NEEQ (835020), Shandong Beichen is a national little-giant specializing in plate heat exchangers for nuclear, thermal-power, petrochemical and district-heating service, holding China highest A6 plate-heat-exchanger safety registration.
View profile →THT Group (Siping Juyuan Hanyang)
四平市巨元瀚洋板式换热器有限公司 (THT) Siping, JilinOperating since 1986, THT is a domestic leader in plate heat exchange with more than 200,000 installed cases across nuclear, marine, petro-chemical, power and HVAC, offering eight product families and over 100 models.
View profile →Siping ViEX Heat Exchange Equipment Co., Ltd.
四平维克斯换热设备有限公司 Siping, JilinTracing its history to 1963 (the former Siping Heat Exchanger General Factory) and introducing French Vicaire technology in 1993, ViEX is a well-known name in the Chinese plate-heat-exchanger sector.
View profile →Guangdong Jiema Energy Saving Technology Co., Ltd.
广东捷玛节能科技股份有限公司 Guangzhou, GuangdongSince 2005, Jiema has been an integrated research, development and manufacturing company exporting plate, shell-and-tube and air heat exchangers to global HVAC, chemical, food and power markets.
View profile →Shanghai Heat Exchange Equipment Co., Ltd.
上海板换机械设备有限公司 ShanghaiA Shanghai-based specialist focused on detachable plate heat exchangers and welded plate heat-exchange units, serving HVAC, district heating, food & beverage, pharmaceutical and chemical process markets.
View profile →Siping Dongda Heat Exchanger Engineering Co., Ltd.
四平东大换热器工程有限公司 Siping, JilinLocated in Siping — a long-established Chinese hub for plate-heat-exchanger manufacturing — Dongda develops and produces plate heat exchangers and complete heat-exchange stations for heating, HVAC and industrial process applications.
View profile →Lanzhou LS Heat Exchange Equipment Co., Ltd.
兰州兰石换热设备有限责任公司 Lanzhou, GansuA subsidiary of the Lanzhou LS (Lanshi) group, LS Heat Exchange produces plate and shell-and-tube heat exchangers for petrochemical, refining, fertilizer and power-generation projects, with a strong base in northwest China.
View profile →Brazed, Microchannel & Aluminum Plate-Fin
Specialists in compact, high-performance exchangers — brazed plate (BPHE), microchannel and aluminum brazed plate-fin — for refrigeration, HVAC and engine-cooling duty.
Selection tip: Use brazed plate (BPHE) where compactness and a gasket-free seal matter (refrigeration, hydronic HVAC); microchannel for low-GWP refrigerant and high-side AC duty; aluminum brazed plate-fin for engine oil, charge-air and compressor cooling. Respect the maximum service temperature (typically ~+225°C) and verify refrigerant material compatibility.
Wuxi Hongsheng Heat Exchanger Mfg. Co., Ltd.
无锡宏盛换热器制造股份有限公司 Wuxi, JiangsuListed on the Shanghai Stock Exchange (603090) and focused since 2000 on aluminum brazed plate-fin heat exchangers and cooling modules for air compressors, construction machinery and hydraulic systems.
View profile →Zhejiang DunAn Artificial Environment Co., Ltd.
浙江盾安人工环境股份有限公司 Zhuji, ZhejiangListed on the Shenzhen Stock Exchange (002011), Dunan is a global leader in refrigeration components and HVAC. Its MPHX microchannel plate heat exchanger is widely used in low-GWP refrigerant applications.
View profile →SWEP China (Suzhou)
舒瑞普换热设备(苏州)有限公司 Suzhou, JiangsuSWEP is a brazed plate heat exchanger (BPHE) specialist of Swedish origin with a manufacturing base in Suzhou, supplying compact brazed plate exchangers for HVAC, refrigeration, district heating and industrial applications worldwide.
View profile →Air-Cooled & Industrial Heat Transfer
Suppliers of air-cooled condensers (ACC), air-coolers, welded plate-shell exchangers and large industrial heat-transfer packages for power, petrochemical and refining.
Selection tip: Specify air-cooled condensers (ACC) and air-coolers when water is scarce or discharge is restricted — common in power, petrochemical and remote sites. For refining and high-pressure duty prefer welded plate-shell. Size to the site ambient design temperature and fouling factor, and weigh water-savings targets against fan power.
Harbin Air Conditioning Co., Ltd. (HAC)
哈尔滨空调股份有限公司 (哈空调) Harbin, HeilongjiangListed on the Shanghai Stock Exchange (600202) and established in 1952, HAC is a pioneer of air-cooled heat exchange in China, serving petrochemical, power-generation and nuclear air-handling applications.
View profile →Lanpec Technologies Co., Ltd. (LANPEC)
甘肃蓝科石化高新装备股份有限公司 Lanzhou, GansuListed on the Shanghai Stock Exchange (601798) and part of Sinomach, LANPEC focuses on heat and mass transfer and separation, supplying plate-shell and welded plate exchangers for refining and petro-chemical plants.
View profile →Shuangliang Eco-Energy Systems Co., Ltd.
双良节能系统股份有限公司 Jiangyin, JiangsuShuangliang is a comprehensive energy-efficiency group whose high-efficiency heat-transfer and air-cooled (water-saving) technologies are widely used in power, chemical and district-cooling projects.
View profile →ShaanGu (Shaanxi Blower Group)
陕西鼓风机(集团)有限公司 Xi'an, ShaanxiShaanGu (Shaanxi Blower) is an equipment group whose energy-and-power business includes air-cooled heat-exchange systems (air-cooled islands / ACC) and energy-recovery turbines for power, metallurgy and chemical plants. Listed as Shaanxi Blower Power (601369).
View profile →Tianjin Baocheng Machinery Manufacturing Co., Ltd.
天津宝成机械制造股份有限公司 TianjinBaocheng is a Tianjin-based equipment manufacturer producing heat exchangers, boilers, pressure vessels and heating-network equipment for district heating, cogeneration and industrial steam systems.
View profile →Air-to-Air Heat Recovery
Manufacturers focused on air-to-air heat recovery — plate, heat-pipe and rotary (enthalpy) wheels for ventilation, drying and industrial waste-heat recovery.
Selection tip: Plate (sensible) exchangers suit most ventilation and industrial exhaust; rotary wheels recover both sensible and latent heat at high effectiveness but need careful attention to cross-contamination; heat pipes excel in freeze-prone or contaminated streams. EN159 specializes in this air-to-air segment — see our product pages for plate, heat-pipe and rotary options.
Zibo Qiyu Air Conditioning Equipment Co., Ltd.
淄博气宇空调设备有限公司 Zibo, ShandongZibo Qiyu is an air-to-air heat-exchange specialist serving industrial waste-heat recovery, mine ventilation, drying and clean-exhaust applications. It is the manufacturing base behind the EN159 product range.
View profile →Comprehensive & Diversified Groups
Larger industrial groups that include heat-exchanger and thermal-equipment business alongside other core product lines.
Selection tip: Engage these diversified groups for utility-scale, petrochemical or infrastructure programs that need integrated thermal equipment, pressure vessels and EPC capability — rather than off-the-shelf units. They are best approached for turnkey packages and large engineered systems.
Shandong Himile Science and Technology Co., Ltd.
山东豪迈科技股份有限公司 Weifang (Gaomi), ShandongHimile is a Shandong-based industrial group best known for tire molds and precision casting, with a growing heat-exchanger and chemical-equipment business serving energy, petrochemical and marine markets. Listed on the Shenzhen Stock Exchange (002595).
View profile →Nanjing ZhongSheng Technology Co., Ltd.
中圣科技(南京) Nanjing, JiangsuZhongSheng (Nanjing) is an engineering group specializing in high-efficiency heat-transfer and thermal-equipment solutions — including heat rods for permafrost engineering, welded plate exchangers and pressure vessels — for oil & gas, petrochemical and infrastructure projects.
View profile →Looking for an air-to-air heat exchanger?
EN159 designs and supplies plate, heat-pipe and rotary air-to-air heat exchangers for industrial waste-heat recovery. Talk to our engineering team.
Request a quote