Tag Archive heat exchanger

Structural characteristics of
·All-heat exchanger is formed by overlapping,bonding and processing of mutually perpendicular air channel corrugated and all-heat exchange paper.·The air passage for fresh air and exhaust air is a 90°vertical cross flow structure.The air passage is simple and smooth.
·There are two kinds of materials for the air channel to choose from.The A series adopts PVC,which is anti-aging,not easy to get dirt and breed bacteria and microbes.The spacing between the plates is 2.0mm~5.5mm.
·Series B adopts high-strength anticorrosive and flame-retardant corrugated paper with large contact area with heat transfer paper,which greatly improves the heat exchange efficiency.The plate spacing is available for choice of 2.0mm,3.0mm,4.0mm and 5.0mm.
·The full heat exchange paper is made of imported non-porous film paper(ER paper)and processed by a special process.It is characterized by good air tightness,high heat transfer efficiency,tear resistance,aging resistance,mildew resistance and antibacterial properties.
·Automatic production line is adopted to ensure the consistency of heat exchange sheet shape and surface flatness.·The size of the structure is not limited.Our company can process any square or rectangular section and any length of heat exchange core according to customer requirements.
·It can be cleaned by vacuum cleaner and compressed air,easy to use and easy to maintain.
application
·AC Ventilation System
·Room Ventilation System
·Industrial Ventilation System
·Heat Pump Drying System
·Indirect Evaporative Cooling System
·Large-scale Scientific Breeding Bystem
·Purify Air Conditioning Fresh Air System
·Wind Generator Air to Air Indirect Cooling System
·Heat Recovery in Winter
·Cold Recovery in Summer

Structural characteristics of
·The new exhaust air of BQL all-heat exchanger crosses and reversely flows at a certain Angle,with long flow passage,sufficient heat exchange and high heat exchange efficiency;·Diamond-shaped structure can effectively reduce the height of equipment and save installation space;
·The full heat exchange paper is made of imported non-porous film paper(ER paper)and processed by a special process.It is characterized by good air tightness,high heat transfer efficiency,tear resistance,aging resistance,corrosion resistance and antibacterial;
·Special adhesive coating process is adopted to ensure the air tightness of the heat exchanger and effectively avoid cross-contamination of new exhaust air;
·It can be cleaned by vacuum cleaner and compressed air,easy to use and easy to maintain;
·Different plate spacing(2.0mm,3.0mm,4.0mm,5.0mm)and any combination length;
·The structure size is not limited,and can be customized according to user requirements;

Application and application mode
·AC Ventilation System
·Room Ventilation System
·Industrial Ventilation System
·Heat Pump Drying System
·Indirect Evaporative Cooling System
·Large-scale Scientific Breeding Bystem
·Purify Air Conditioning Fresh Air System
·Wind Generator Air to Air Indirect Cooling System
·Heat Recovery in Winter
·Cold Recovery in Summer

Structural characteristics of
·BXB sensible heat exchanger can be made of seawater corrosion resistant hydrophilic aluminum plate,epoxy resin aluminum plate or stainless steel plate;
·The heat transfer surface of the heat exchanger was strengthened by heat transfer stamping,and the heat transfer area was increased by 10%-12%;
·The heat exchange sheet adopts enhanced punching and biting technology,with higher strength,better sealing,and air leakage rate less than 1%;
·The air passage is supported by a conductor convex cylinder with a high pressure difference capacity of 2500Pa for new exhaust;
·The normal service temperature of ordinary aluminum foil is not higher than 100℃;the temperature resistance of special sealing material can be up to 200℃;the temperature resistance of stainless steel can be 350℃;
·Tap water or neutral washing liquid can be used for direct cleaning,which is easy to use and easy to maintain;
·Different plate spacing(2.0mm-10.0mm)and any combination length can be provided.

application
·AC Ventilation System
·Room Ventilation System
·Industrial Ventilation System
·Heat Pump Drying System
·Indirect Evaporative Cooling System
·Large-scale Scientific Breeding Bystem
·Purify Air Conditioning Fresh Air System
·Wind Generator Air to Air Indirect Cooling System
·Heat Recovery in Winter
·Cold Recovery in Summer

The air-gas plate heat exchanger for air waste heat recovery is made of seawater corrosion-resistant hydrophilic aluminum plate, epoxy resin aluminum plate or stainless steel foil. The heat transfer surface of the heat exchanger is subject to enhanced heat transfer stamping forming treatment. The heat exchanger adopts enhanced stamping undercut technology, which has higher strength, better sealing performance and less than 1% air leakage rate; The air passage is supported by a conductor convex cylinder, and the capacity to withstand the new exhaust pressure difference is 2500 Pa; The normal use temperature of ordinary aluminum foil is not higher than 100 ℃, the temperature resistance of special sealing material can reach 200 ℃, and the temperature resistance of stainless steel material can reach 350 ℃; It can be cleaned directly with tap water or neutral detergent, which is convenient to use and easy to maintain; Provide different plate spacing (2.0mm-10.0mm) and any combination length.
The products are widely used in commercial central air conditioners, industrial purification air conditioners, healthy and green residences, data center heat exchange, 5G base stations, medical purification, wind power heat exchange, large-scale breeding energy-saving ventilation, new energy vehicles, printing machines, coating machines, sizing machines, charging pile heat exchange, printing, food, tobacco, sludge drying and other fields,